3D panel fences
Welded 3D panels in 4 or 5 mm wire, 1.03 to 2.03 m high. Galvanised and painted green, anthracite or brown.
A panel fence for years to come
A 3D panel fence is the most popular choice for modern private houses and businesses. It lasts a long time and needs almost no maintenance. The straight, symmetrical lines of wire and the discreet colour give a site a tidy look. In quality our panels are on a par with those of European manufacturers, but they are made in Jelgava, so they are available without import middlemen.
The panel is welded from steel wire and has 30 mm deep V-shaped bends. These give the panel its stiffness, so it does not sag even over long runs.
Specifications
- Wire diameter: 4 mm or 5 mm
- Height: 1.03 m; 1.23 m; 1.53 m; 1.73 m; 2.03 m
- Panel width: 2.5 m
- Mesh size: 50 × 200 mm
- Bend depth: 30 mm
- Colour: green (RAL 6005), anthracite (RAL 7016), brown (RAL 8017) or hot-dip galvanised (HDG); other RAL shades to order
The range also includes the STRONG panel — 1.53 m high, 4 mm wire, with a denser 50 × 100 mm mesh. It is a cheaper alternative to the 5 mm panel when you need more stiffness. We can make other heights on individual request and calculation.
Material and coating
Painted panels are made from hot-dip galvanised steel wire, with a powder coating over the zinc. Hot-dip galvanised (HDG) panels are welded from black wire, and the finished panel is then hot-dip galvanised — so the zinc also covers the welds. Their durability is proven by fences installed in Latvia that have served for years through all four seasons.
4 mm or 5 mm?
A 4 mm panel is sufficient for a private house and garden. A 5 mm panel is stiffer and more impact-resistant, so it is chosen for schools, kindergartens, sports grounds, factories and places where the fence is long and under load.
If you cannot decide, ask our specialists or come to our factory in Jelgava — you can see and compare both panels on site.
Where panel fences are used
- Private houses and summer cottages
- Kindergartens, schools and sports grounds
- Municipal buildings and parks
- Factories, warehouses and industrial sites
The right match for the panels are our posts for panel fences, 60 × 40 mm, and gates in the same colour. Fixings and connectors can be bought in the shop together with the panels.
-
A green panel fence by a residential house -
A panel fence with gates by a lake -
A galvanised panel fence along a railway -
The V-shaped bends of a panel close up -
Painted panels on pallets before dispatch
How many panels and posts do I need?
One panel is 2.5 m wide. Number of panels = fence length divided by 2.5, rounded up. Number of posts = number of panels plus one for each separate run of fence. The calculator in our shop works this out automatically.
Can panels be cut to the length I need?
If necessary, a panel can be shortened with a cutting tool and the cut touched up with zinc spray or spray paint in the same colour so that it does not rust. It is better, though, to choose a standard height and width. We do not make panels to measure.
Which colour is the most popular?
The most popular are green (RAL 6005) and anthracite (RAL 7016).
Need a price right away?
Standard products with prices are in our online shop.